Reset HP Deskjet Printer | 2540 | Factory Reset
Quick Steps to Reset HP Deskjet 2540
- If printer is turned off, turn it on.
- Wait a while and try nothing.
- Do not continue working until the printer is turned off and silent. If the printer is doing something or making noise, the reset will not be successful.
- Disconnect the power cord from the printer.
- When removing the power plug, make sure your HP printer is turned on.
- Unplug the power cord.
- Check the settings on your printer.
- Make sure the printer settings change from default settings to default settings.
- Change the network settings of the printer to the default settings. Go to the printer control panel.
- Press and hold the Wireless and Cancel buttons for about five seconds.
- Release the keys, and then make sure the settings have changed.
Detailed Guided Steps on How to Reset HP Deskjet 2540
Read the process carefully to reset hp deskjet printer properly.
- The first step is to remove all the cables and memory card from the printer.
- Disconnect the power cord behind the printer, while the printer is on.
- Remove the other end of the power cord from the power source.
- If you find any power cord module, cut off one side and reconnect the other.
- Now, press and hold the power and power buttons together, then connect the power cable.
- Keep holding the button for 20 seconds and then release.
- Attach the power cord to the wall and avoid connecting it to protect the protector or battery.
- It is recommended by HP specialists, that the printer should be connected to the wall directly to ensure a stable power level.
- In some cases printing problems arises due to power issues.
Wait for the printer to open. - If not, turn on the printer with the power button. Before connecting the cables to another printer, try making a copy if your printer is in-one. Now try to reconnect it.
- On Mac, you can do an HP printer reset.
- Resetting the printer can help fix some specific problems with your Mac, such as queued print jobs, incomplete print drive installation, and communication problems between the printer and the Mac.
- On your Mac, click on the Apple menu and then select the System Preferences option.
- Now tap on the Printers & Scanners Print & Scan or Print & Fax. Click inside the printer window, right-click or Control+click and select Reset Printing System.
- When prompted, click Reset or OK. When prompted, enter your username and password, then click the OK button. Printing system reset is complete. Now turn off the printer, wait 5 seconds, then turn the printer back on.
- Wait until the printer is idle and quiet. Select the Add button in the Printers window on your Mac. Find the printers from the list now tap on Add.
- Your printer will now appear in the list.
- Resolved a solution on how to reset the HP Deskjet 2540 printer.
Restore Printer to Factory Default Settings
If you have a connector or a troubleshooting problem that you can’t seem to fix, restoring your printer to its default factory setting can simply lift you up and run again. Restoring to the default is also a great way to protect personal information such as passwords and backup plans from a third party if you are sending your printer to be repaired, or to fix it or repeat it.
For troubleshooting and printer troubleshooting problems, we recommend trying hard to get started. Re-hardening resets your printer but does not return to factory default settings This is a better option first if you have already sorted your printers or set up your wireless connection, that way you do not have to start going back one corner.
Process to Make hard Reset on the Printer
When the cartridges are still installed, turn off the power to the printer, and then plug the power cord into the wall.
Wait a minute, then restart the printer and back it up. Wait for the cartridges to come out in the middle and try printing again.
Restoring the factory defaults restores most settings to factory defaults. HP printers do not reset the page count, tray size, or language. See your printer’s user guide for specific machine reset procedures. If you don’t have a user guide for your printer, you can usually find a digital PDF version on the printer manufacturer’s website. This section describes the steps for some common printer models.
Reset factory default settings OfficeJet Pro 8710 / OfficeJet 8035 / OfficeJet Pro 8025 / OfficeJet Pro 8025/HP OfficeJet 9015 / HP OfficeJet 9025 Printers
- Touch or slide the tab at the top of the screen to open the dashboard on the printer control panel
- Select “Configuration”, then select “Printer Maintenance”
- Select “Restore”, then select “Restore Factory Defaults”
- A message appears indicating that the factory default settings will be restored.
- Select “Restore” to complete the reset process.
